StickPage Spring Animation Competition - For Glory: eSports - $5,000 in prizes, 15 placements, $1,500 first prize!
BEGINNER'S StickPage Spring Animation Competition - Unconventional Weapons - $1,000 in prizes!
Results 1 to 9 of 9

Thread: Stickmen on Flash Help

  1. #1
    iStick G
    Guest

    Stickmen on Flash Help

    Whenever I see a stick movie made in flash on SPP, it looks great, and the stickmen look great as well... but how? They seem to be in proportion all the time like in pivot, when where you move a joint, it doesn't change shape, size or proportion. But when I try to draw a stickman in flash, it always comes out wrong, like this:

    Now, to be fair i drew this without using the straight line tool, which most videos i see don't use anyway and they still come out fine, and even when I do use the straight line tool and draw a half-decent stickman, when i try to move a joint, this happens:

    The joint just resizes and doesn't move. So I want to know, is their anyway to fixate the joint so it doesn't do this? How can i get my stickmen looking pivot perfect in flash?
    ->

  2. #2
    Never Mind... Komaru's Avatar
    Join Date
    Jan 2008
    Location
    Pennsylvania Program: Flash 8
    Posts
    257
    Freeform select tool.
    Move the center to the place of the joint attachment, and then just rotate it.


  3. #3
    iStick G
    Guest
    by center do you mean the little white circle?

  4. #4
    What dat mouth do? Gavel's Avatar
    Join Date
    Oct 2006
    Location
    Chlamydiaaaaaaaaaaaaaa Hoes:1,765,786.5
    Posts
    6,566
    Um, "Pivot perfect"? Don't use the pivot method of animating in Flash. It's much easier too work up your frame-by-frame animation capabilities instead. Use the brush tool or the pencil tool and draw your stick figures in the desired positions on each frame. Everyone thinks it's hard because you redraw it every frame, but it's actually less time consuming than pivot because instead of moving each and every limb into place, you just draw it.

  5. #5
    iStick G
    Guest
    yeah, i understand that, it's just with pivot the limbs are always the same shape and thickness, but with flash if you keep redrawing the guy his limbs usually end up changing length and stuff.

  6. #6
    What dat mouth do? Gavel's Avatar
    Join Date
    Oct 2006
    Location
    Chlamydiaaaaaaaaaaaaaa Hoes:1,765,786.5
    Posts
    6,566
    The change wouldn't be big enough to be noticeable if you're going through it patiently and putting effort into it. You can also turn on the grid and the onion skin tool.

  7. #7
    i <3 fat people
    Join Date
    Jan 2006
    Location
    USA
    Posts
    901
    well if you want line to be consistant use the pencil tool and pick a thinkness.

  8. #8
    bitchin' meatcar Ordinair's Avatar
    Join Date
    Aug 2005
    Location
    Canada
    Posts
    296
    Flash doesn't work like pivot. You just cant drag the ends of the lines and have flash automaticly know which lines you want to move with line. It is possible to have the joints act like pivot though if you group all the joints and have the lower joints put inside the group of the upper joints.

    For example:

    Draw the body. Group it with Ctrl+G. Double click on the new group. Draw an arm. Group it. Change the rotation point to the shoulder (white circle). Double click. Repeat for lower arm etc. Then go back to the main stage and repeat for the different limbs.

    Or of course you could just redraw the frame which maybe be less complicated but will take more time in the long run.

  9. #9
    What dat mouth do? Gavel's Avatar
    Join Date
    Oct 2006
    Location
    Chlamydiaaaaaaaaaaaaaa Hoes:1,765,786.5
    Posts
    6,566
    Quote Originally Posted by strong2 View Post
    Or of course you could just redraw the frame which maybe be less complicated but will take more time in the long run.
    Well not really. To group, position, and rotate every single limb in each frame would be more time consuming than just redrawing it with the line tool. And it wouldn't look as good.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •