Are u asking for my take on the bow or RawGreen?
Also yeah i guess ur right im still new to those symbols
But yeah @RawGreen My main question was turning a pair of aviators to a sword. I have the reference pictures and everything but im asking if that is allowed in a request
[RawGreen]Temporary Object Request Center
Started by: RawGreen | Replies: 48 | Views: 8,308
Nov 23, 2015 6:55 PM #1417981
Nov 23, 2015 10:11 PM #1418005
Rawgreens since this is his thread...
Nov 24, 2015 2:48 AM #1418043
alright
Nov 24, 2015 2:53 AM #1418044
Here is the preview for the most recent Object created:
Mode - TraceSpear: http://sta.sh/0ayn81yz3bw
The FLA files will be sent to the requesting individuals through the private message system shortly after this post is submitted.
Accepted. Unfortunately things are congested at work right now so things will take a little longer, you can expect your request to be done within the next 72 hours.
I already answered this question... I'll spell it out for you.
Yes, I am able to do transformation animations in requests.
However, I cannot say whether or not I can accept your request- as you have not made one yet.
Mode - TraceSpear: http://sta.sh/0ayn81yz3bw
The FLA files will be sent to the requesting individuals through the private message system shortly after this post is submitted.
Quote from Arch-Angel
Description: I want Sylvanas' bow, the one from her HotS master skin. I don't want it at an angle like in the reference picture.
Reference Picture (Click to Show)
Additional Info: The quiver would also be an excellent addition. I don't desire a textured version either.
Accepted. Unfortunately things are congested at work right now so things will take a little longer, you can expect your request to be done within the next 72 hours.
Quote from Toxic_Element
But yeah @RawGreen My main question was turning a pair of aviators to a sword. I have the reference pictures and everything but im asking if that is allowed in a request
I already answered this question... I'll spell it out for you.
Yes, I am able to do transformation animations in requests.
However, I cannot say whether or not I can accept your request- as you have not made one yet.
Nov 24, 2015 8:27 AM #1418087
Request: A katana.
Reference pictures:
Additional Information: The flames design, make it #C10000 (that sounds like a good code name for some explosive, doesn't it). I need that 'fire' design badly on the katana. Try to make the design stay visible even at 400% zoom (in flash), in case a situation arises where I may need to re-size it.
Reference pictures:
stuff (Click to Show)
Additional Information: The flames design, make it #C10000 (that sounds like a good code name for some explosive, doesn't it). I need that 'fire' design badly on the katana. Try to make the design stay visible even at 400% zoom (in flash), in case a situation arises where I may need to re-size it.
Nov 24, 2015 1:41 PM #1418129
Yo RawGreen i have A Challenge and an order
would you make Me A Sword Info is Below
I Want you to Make A Sword Like the picture Below
The Main Color is White That is #F0FFF0 And Secondary Color is #DAA520
hope you can do it
would you make Me A Sword Info is Below
I Want you to Make A Sword Like the picture Below
EXAMPLE (Click to Show)
The Main Color is White That is #F0FFF0 And Secondary Color is #DAA520
hope you can do it
Nov 25, 2015 5:59 AM #1418271
@OhBestlyCX i have a flash 8 file of that sword!! Sword Art Onlin3!!!
Nov 25, 2015 7:04 AM #1418282
Heres my order form:
Description of what you want: Sorta a japanese war fan and it transforming into a pair of aviators (i couldn't find a pair of transparent background aviator thingy) Also if you can keep it desperately at the same time, the aviator and war fan
Reference pictures:
http://www.therionarms.com/reenact/therionarms_c1148.jpg
Additional Information: Just make it cool thankks (Also i was trying to make this but had trouble so if u can do this as a small favour that would be awesome
http://www.kenfuderyu.co.za/images/martialarts/ChinaEastAsia/Weapons/Rope%20Javelin%20-%20Sen%20Biao.jpg (without the rope)
Description of what you want: Sorta a japanese war fan and it transforming into a pair of aviators (i couldn't find a pair of transparent background aviator thingy) Also if you can keep it desperately at the same time, the aviator and war fan
Reference pictures:
http://www.therionarms.com/reenact/therionarms_c1148.jpg
Additional Information: Just make it cool thankks (Also i was trying to make this but had trouble so if u can do this as a small favour that would be awesome
http://www.kenfuderyu.co.za/images/martialarts/ChinaEastAsia/Weapons/Rope%20Javelin%20-%20Sen%20Biao.jpg (without the rope)
Nov 27, 2015 3:53 AM #1418742
@Arch-Angel, I got wrecked at work this Thanksgiving week, a short extension on your order's wait, I'll have it up with the next batch of orders.
Accepted. Not entirely sure where you want the flame design but I'll do what's considered generic or typical.
The flames will likely be large in size to keep visibility up.
Kirito's Sword from SAO. Accepted.
Denied, sorry bud, you'll have to make due on your own.
Accepted orders will be up within the next 48 hours, guaranteed! Including Arch-Angel's Order from earlier.
Edit: Within the next 72 hours*
I'm getting screwed over HARD this weekend.
Quote from S.A.Request: A katana.
Reference pictures:stuff (Click to Show)
Additional Information: The flames design, make it #C10000 (that sounds like a good code name for some explosive, doesn't it). I need that 'fire' design badly on the katana. Try to make the design stay visible even at 400% zoom (in flash), in case a situation arises where I may need to re-size it.
Accepted. Not entirely sure where you want the flame design but I'll do what's considered generic or typical.
The flames will likely be large in size to keep visibility up.
Quote from OhBestlyCXYo RawGreen i have A Challenge and an order
would you make Me A Sword Info is Below
I Want you to Make A Sword Like the picture Below
EXAMPLE (Click to Show)
The Main Color is White That is #F0FFF0 And Secondary Color is #DAA520
hope you can do it
Kirito's Sword from SAO. Accepted.
Quote from Toxic_ElementHeres my order form:
Description of what you want: Sorta a japanese war fan and it transforming into a pair of aviators (i couldn't find a pair of transparent background aviator thingy) Also if you can keep it desperately at the same time, the aviator and war fan
Reference pictures:
http://www.therionarms.com/reenact/therionarms_c1148.jpg
Additional Information: Just make it cool thankks (Also i was trying to make this but had trouble so if u can do this as a small favour that would be awesome
http://www.kenfuderyu.co.za/images/martialarts/ChinaEastAsia/Weapons/Rope%20Javelin%20-%20Sen%20Biao.jpg (without the rope)
Denied, sorry bud, you'll have to make due on your own.
Accepted orders will be up within the next 48 hours, guaranteed! Including Arch-Angel's Order from earlier.
Edit: Within the next 72 hours*
I'm getting screwed over HARD this weekend.
Nov 27, 2015 5:46 PM #1418885
Quote from RawGreenAccepted. Not entirely sure where you want the flame design but I'll do what's considered generic or typical.
The flames will likely be large in size to keep visibility up.
You could do it like it is in the pic - the flames coming out from the 'edge' (see, the black outline) of the sword. Or add your own style to it, if you feel like. Either way, I'd just like to have a piece of your work haha.
Nov 27, 2015 7:20 PM #1418901
Quote from S.A.You could do it like it is in the pic - the flames coming out from the 'edge' (see, the black outline) of the sword. Or add your own style to it, if you feel like. Either way, I'd just like to have a piece of your work haha.
Oh! that's actually called the Hamon, it's something that happens in the process of hardening a katana.
This pattern varies between different smiths making them usually pretty distinct.
If you want to read about it: https://en.wikipedia.org/wiki/Hamon_(swordsmithing)
I'll be sure to do something nice with this.
Nov 28, 2015 3:44 PM #1419073
Quote from RawGreenOh! that's actually called the Hamon, it's something that happens in the process of hardening a katana.
This pattern varies between different smiths making them usually pretty distinct.
If you want to read about it: https://en.wikipedia.org/wiki/Hamon_(swordsmithing)
Holy shit, that 'design' is actually a thing!? Thanks man.
I'll be sure to do something nice with this.
Looks like I've placed an order with an epic smith.
Nov 30, 2015 1:52 AM #1419410
Hey man! Is it ok if I order twice from here? That spear is more for a personal project. This next weapon is for my RHG. If that's OK this order also comes with a challenge. (Atleast I think it'll be a challenge for you.)
Dec 1, 2015 2:53 PM #1419749
Quote from RawGreenEdit: Within the next 72 hours*
That's fine by me. Take your time man.
Dec 1, 2015 4:14 PM #1419770
I hope life's not being too gangster, Rawbro